If you’re a Bell Fibe TV subscriber and you’ve been greeted by the dreaded Error Code 201W, you know exactly what we’re talking about. This technical hiccup can interrupt your viewing experience, but don’t let it ruin your leisure time just yet.
In this blog post, we’re going to guide you through some straightforward troubleshooting steps to get your Bell Fibe TV back in action.
Error Code 201W is often a sign of connectivity issues, which may stem from your receiver or your network setup.
How To Fix Bell Fibe TV Error Code 201W?
To Fix Bell Fibe TV “Error Code 201W”, you should power cycle your device, check the Internet connection and update the firmware. Additionally, you should also do a receiver reset to fix Bell Fibe TV “error code 201W.”
1. Power Cycle Your Device
Power cycle your device by unplugging it from the power source, waiting for a few minutes, and then plugging it back in. This can help resolve temporary issues with the device.
To power reset your Bell Fibe TV, follow these steps:
- Unplug the power cable from the back of the Fibe TV receiver.
- Wait for 10-20 seconds.
- Reinsert the power cable.
- Wait for approximately five minutes for the Fibe TV receiver to restart
2. Check Internet Connection
While experiencing a slow or no internet connection, it is suggested to reboot the Wi-Fi router. These are the steps to follow in restarting the Wi-Fi router:
- Simply switch off the router and unplug it from all the devices and power supply.
- Wait for 3 minutes and then plug it in again.
- Now wait for the signal to come back and connect to the internet through it.
You can check your internet speed by clicking here.
3. Update Firmware Of Your Device
Updating firmware on Bell Fibe TV involves checking for and installing any available firmware updates for the device. It’s important to keep the firmware up-to-date to avoid any issues with the device.
Here’s how to update the firmware:
Android:
- Connect your device to a Wi-Fi network.
- Go to your device’s Settings.
- Scroll down and tap on ‘System,’ then ‘System update‘ or ‘Software update.’
- Tap ‘Check for update.’ If an update is available, follow the prompts to install.
iPhone:
- Connect your iPhone to Wi-Fi.
- Go to ‘Settings‘ > ‘General.’
- Tap on ‘Software Update.’
- If an update is available, tap ‘Download and Install.’
Smart TV:
The steps can vary depending on the brand and model, but here are steps for updating a Samsung Smart TV as an example:
- Press the ‘Menu‘ or ‘Home‘ button on your remote control.
- Navigate to ‘Settings,’ then ‘Support.’
- Select ‘Software Update,’ and then ‘Update Now.’
4. Reset The Receiver
If the above steps don’t work, you might need to reset your receiver.
To reset a Bell Fibe TV receiver, you can follow these steps:
- Unplug the Power Cable: Disconnect the power cable from the back of the Fibe TV receiver.
- Wait: Wait for 10 seconds.
- Reinsert the Cable: Reinsert the power cable.
- Wait for Reboot: Wait approximately five minutes for the Fibe TV receiver to reboot.
Additionally, for a factory reset to discard changes and reset the receiver to its original factory settings, you can follow these steps based on the Bell Fibe TV user guide:
- Press the Menu button to display the Main menu.
- Select the System Setup option to display the System Setup menu.
- Select the Installation option to display the Installation and Setup menu.
- Select the Factory Defaults option.
- Confirm the reset when prompted.
5. Contact Bell Fibe Support
If the error persists after trying the above steps, it may indicate a more complex issue. In this case, it’s best to contact Bell Fibe TV support for further assistance. They can provide specific guidance based on the nature of the error.