If you’re encountering the frustrating Arlo Camera Error Code 4209, you’re not alone.
This error can be a roadblock to keeping your home or business secure with your Arlo camera system.
Fortunately, there are several troubleshooting steps you can take to resolve this issue and get your cameras back up and running smoothly.
In this comprehensive guide, we’ll explore the various methods to fix Arlo Camera Error Code 4209, drawing on both expert advice and real user experiences.
Let’s dive in and get your Arlo cameras back to optimal functionality.
How To Fix Arlo Camera Error Code 4209
To fix Arlo camera error code 4209, you can ensure the camera is fully charged and near the base station/router, reinsert the camera battery, troubleshoot firmware updates, and check for network interruptions.
1. Ensure The Camera Is Fully Charged And Near The Base Station/Router
A common cause of Error Code 4209 is a low battery.
Make sure your camera is fully charged and located in close proximity to the base station or router to ensure a strong connection.
2. Reinsert The Camera Battery
Try rebooting the base and reinserting the camera battery to reset the connection.
If the issue persists, remove the camera from Settings, and My Devices, and resync it to the base station.
3. Troubleshoot Firmware Updates
If the camera constantly shows that a firmware update is required but fails to update with Error Code 4209, follow the troubleshooting steps provided by Arlo to address firmware update issues.
For Android
- Open the Arlo app on your Android device.
- Navigate to the settings section within the Arlo app.
- Select the specific camera that you want to update from the list of devices.
- Look for the option to check for firmware updates within the camera settings.
- If a firmware update is available, follow the on-screen prompts to initiate the update process.
- Allow the firmware update to complete without interrupting the process.
- Once the update is finished, verify that the camera firmware has been successfully updated.
For iPhone
- Open the Arlo app on your iPhone.
- Navigate to the settings section within the Arlo app.
- Select the specific camera that you want to update from the list of devices.
- Look for the option to check for firmware updates within the camera settings.
- If a firmware update is available, follow the on-screen prompts to initiate the update process.
- Allow the firmware update to complete without interrupting the process.
- Once the update is finished, verify that the camera firmware has been successfully updated.
4. Check For Network Interruptions
Error Code 4209 may occur due to network interruptions. Ensure that your network connection is stable and free from disruptions to allow for a successful firmware update.
If the signal is weak, consider repositioning the camera closer to the Wi-Fi router or using a Wi-Fi extender to improve the signal strength.
Check other devices connected to the same network to verify that the network itself is functioning properly.
5. Contact Arlo Support
If the above steps do not resolve the issue, it’s advisable to reach out to Arlo’s support team for further assistance. They can provide personalized guidance and troubleshoot the error in more detail.