A dishwasher is a great appliance to have in your home, but when it starts to malfunction, it can be frustrating.
One of the most common errors that can occur in a Bosch dishwasher is the E15 error code.
This error code can be caused by a variety of issues, including a clogged drain hose, a faulty water inlet valve, or a malfunctioning circulation pump.
If you’re experiencing this error code, don’t worry!
In this blog post, we’ll walk you through how to fix the E15 Bosch dishwasher error code step by step.
By the end of this post, you’ll have the knowledge you need to get your dishwasher up and running again. So let’s get started!
How To Fix E15 Bosch Dishwasher Error Code
1. Check For Water In The Base Of The Dishwasher
The E15 error code indicates that the safety switch has detected water in the base of the dishwasher
- Turn off the power supply to the dishwasher.
- Open the dishwasher door and remove the bottom rack.
- Check the base of the dishwasher for any standing water.
- Tilt the dishwasher to one side to allow any water to drain out.
- Once all the water has drained out, level the dishwasher and close the door.
- Turn on the power supply and run a cycle to see if the error code has been resolved.
2. Check The Drain Hose
If the drain hose is clogged or kinked, it can prevent water from draining properly and cause the E15 error code.
- Turn off the power supply to the dishwasher.
- Locate the drain hose at the back of the dishwasher and remove it from the sink drain or garbage disposal.
- Check the drain hose for any obstructions or kinks and remove them.
- Reattach the drain hose to the sink drain or garbage disposal.
- Turn on the power supply and run a cycle to see if the error code has been resolved.
3. Check The Water Inlet Valve
If the water inlet valve is faulty, it can prevent water from entering the dishwasher and cause the E15 error code
- Turn off the power supply to the dishwasher.
- Locate the water inlet valve at the bottom of the dishwasher and remove the access panel.
- Check the water inlet valve for any damage or clogs and clean or replace it if necessary.
- Reattach the access panel and turn on the power supply.
- Run a cycle to see if the error code has been resolved.
4. Check The Circulation Pump
If the circulation pump is malfunctioning, it can prevent water from circulating properly and cause the E15 error code.
- Turn off the power supply to the dishwasher.
- Locate the circulation pump at the bottom of the dishwasher and remove the access panel.
- Check the circulation pump for any damage or clogs and clean or replace it if necessary.
- Reattach the access panel and turn on the power supply.
- Run a cycle to see if the error code has been resolved.